Thanks to everyone who purchased my artwork. I already sold over 20,000+ artworks and counting as of today. Don't forget to follow me and check my new uploads every week at or follow me @ManCave

How to get your artwork to be approved in Displate

Displate Artworks

Displate is obsessed with the quality of the metal prints, hence Displate’s verification system accepts only images that meet our strict print requirements. Our product is of the highest quality, and so must be your design.

Not following our rules may result in your work not being approved in verification or returned by a customer. You must respect the client, our work, and your own time.

So, let’s see what you need to do to prevent your uploads from getting rejected.

but wait, to see some approved artworks before we start these tips, click here

File Preparation Checklist

To be sure of the good quality of the final print, your files must comply with our guidelines. That is: appropriate the resolution, specific ratio, and color profile.
  • The best pixel dimensions are 4000×5600
  • The shortest side of the image should be at least 2900 px
  • Ratio 1.4:1 for the best product fit (ex. 4060px x 2900px)
  • Go for a minimum of 300 dpi
  • The maximum size of the file is 30MB
  • Go for the sRGB color profile
Pro tip! In Photoshop, you can embed a color profile from the “Image” tab, and then “Convert To Profile.” You will need to make the decision on which color profile is appropriate for your images, but the most popular profiles are sRGB and AdobeRGB (1998). To keep the colors the same, be sure to convert to a profile that is the same as your working space – have the “Source Space” and “Destination Space” be the same.
  • Save your image in the JPG file only
  • Generate it from a PSD or TIFF file and then save it as the highest quality image with an embedded color profile
  • If your artworks are traditional – scan your originals in professional companies so that you don’t lose any of their quality

The Most Common Reasons for Rejecting Designs

Displate is very strict when it comes to approving designs since we wish to avoid any possible complaints from our customers. It happens, that even though one design meets our specifications, it can still be of low quality, especially on larger Displates.

To give you a bigger picture, check out the most common reasons why images get rejected in the verification:
  1. Bad-quality images
  2. Manually increased pixel dimensions
  3. Filters to increase the quality
  4. Text and important content too close to the edge
  5. Frames
  6. Multiple uploads of the same image with a changed color palette or tiny detail

Now, let’s see what the whole fuss is about.

1. Bad-quality images

You must be sure about the highest quality of your uploads. All grainy textures and blurred backgrounds will be detected as low-quality factors that don’t meet our print requirements. Keep that in mind as we reject every image that might look bad after printing on metal.

2. Manually increased pixel dimensions

Once created in one size, nothing should be manually stretched just to fit somewhere. Manually increased pictures are easy both to make and detect, hence tons of them get rejected every day in Displate verification.

Enlarging low dimension images to the size allowed by our Multiuploader is a poor procedure with the hope that our system will not notice it. You have to remember that the original size of files accepted at Displate is at least 4060 x 2900px.

3. Filters to increase the quality

Filters are fine, if they’re not used to make something bad looks good.

Remember that printing intensifies the filter effect, so if you’re not sure about the sharpness of your design, the last thing you should do is to put a filter on it just to cover its flaws. Filters should give your artwork a gentle twist – not turn it into something that it is not.

4. Text and important content too close to the edge

Don’t put any texts or essential content too close to the edge. Leave at least 200px from the border of the design and always fit the whole composition within the Displate size. Also, prevent important image elements from being cut off by our Multiuploader.

5. Frames

Adding your own frames to the composition doesn’t meet our technical requirements, and it can be the reason for rejecting your design in verification.

6. Multiple uploads of the same image with a changed color palette or tiny detail

There’s a difference between expanding your collections with designs matching people’s preferences and adding the exact same image for the 100th time just to fill your shop. We don’t want your customer to get bored, we want him to feel excited to express his passions, and the only way to do that is to give him diversified, original art.

Other Reasons for Rejecting Artworks

Besides the main reasons, there are several other cases when our system may not approve your artwork, and the most common are:

  • A very dark composition
  • Blurred or low-quality backgrounds
  • Grainy texture
  • Wrong dimensions of uploaded images
  • Bad-quality scans of the original painting

To Sum Up

It’s a good idea to always double-check if your file is ready before submitting it to Displate.

Check it for:

  1. Proper size -–at least 4060x2900px
  2. Good ratio – 1.4:1
  3. The best quality of all details and backgrounds
  4. No frames
  5. Text and important content at the correct distance from the edge – at least 200px
  6. No filters that increase the quality of your image

Once you’re 100% sure and satisfied with your design, use our Multiuploader and upload your artworks in a few, simple steps!



Most images and item description found in this website are owned by our affiliate partners like eBay, Displate, Sideshow and Society6 or with their partner's artist. It's being used for promotion purposes only.

Popular Posts

Lot of 4 PS2 SOCOM U.S. Navy Seals I, II, III, CA CIB Sony Playstation Games on eBay

Because of feedback I received here some of different galaxy background in my SKYLINE_GALAXY…

Hot Bee Electric Toys Train Steam Locomotive Engine - USB Charging Electric Trai on eBay

Pac-Man World 2 (Original Xbox) CIB Complete Game w/ Registration Card on eBay

Adidas members week 2022 limited edition Ukrainian artist A2 print UK on eBay

G · E · M Series Gintama Kamui Painted Figure Megahouse Japan on eBay

Super Off Road The Baja Super Nintendo SNES on eBay

Gundam Archives Gunpla 40th Anniversary RX-78-2 Gundam Edition Book Japan on eBay

Mars Lightcon Gun for PS4 & Xbox One on eBay

Displate - metal posters | Collect Your Passions